User Manual

1-3
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Display and operation units
Overview and selection guides
Pushbuttons ush-mounted
GAMMA arina-Taster
Touch sensors GAMMA arina – in a matching design program
The attractive design of the touch sensors GAMMA arina is harmonized with the switch and socket program DELTA arina. GAMMA arina was
designed in China for the Asian market. This design line consists of several switches and a communicative KNX thermostat. The arina program is a
complete comprehensive solution for room automation. Switches, sockets and data outlets in the arina program together with intelligent display
and operation units generate a coordinated, harmonious appearance in the room.
Harmony in variety and function
The parameters of the touch sensors GAMMA arina are conform to the parameters and functions of the existing program DELTA i-system and
style. The installers and system integrators can parameterize with a continuous, harmonious application program in the usual structure. With the
touch sensors GAMMA arina all standard functions in a room can be controlled.
There are 1-fold, 2-fold and 4-fold sensors, with orientation lights, with or without status LED to choose. The 4-fold touch sensors can be featured
with a temperature sensor. Therefore the integration into a room temperature control is possible. Another version of the 4-fold touch sensors
is equipped with an IR receiver decoder. All room functions for lighting, solar protection and room climate can be controlled via mobile remote
control. With the integrated scene control a complete scene can be controlled with a single touch.
Technical structure
The touch sensors GAMMA arina are designed as a compact mono block version. A separate bus connection is not necessary. The structure and
installation of the touch sensors GAMMA arina are similar to the product line arina. The device block is square shaped and can only be picked up
from a square shaped installation box (86 x 86 millimeters). The program is issued to the UK installation standard or for the area Asia Pacific/
China.
The touch sensors GAMMA arina are installed in a mounting frame. They can be mounted in simple or multiple frames. The mounting frames
must be ordered separately via Siemens LMV WA Cina.(www.siemens.com.cn/WA)
Note:
The touch sensors GAMMA arina are not designed for round installation boxes in accordance with DIN / VDE.
A
A
B
C
A
B
C
B
C
Front housing
Screw fixing
Mounting Frame
11
04_VS_2017_Gamma HQ_EN_Chapter_1_V2.indd 3 19.08.2018 14:49:11