User Manual

6-15

Solar protection, anti-glare protection, utilization of daylight

Anti-glare/solar protection actuators

Siemens Switzerland Ltd

Building Technologies Division

2019www.siemens.com/gamma

Stock No. Product No. DT

5WG1520-2AB31 UP 520/31 A

UP 520/31Venetian blind actuator 1 x AC 230 V, 6 A, 2 x binary inputs

• Electrically interlocked relay contacts as switching elements

• Contact rated operational voltage AC 230 V

• Contact rated current 6 A at cos phi = 1

• Selectable type of sunblind (Venetian blind / roller shutter)

• Congurable stop time at change of movement direction

• Object for activation / de-activation of the sun protection function

• Congurable sunblind position after activation / de-activation of the sun protection function

• Two safety objects

• Selectable cyclical monitoring of the safety objects

• Moving into a congurable end position on activation or deactivation of the safety function

• Congurable reaction at bus voltage failure and recovery

• 2 binary inputs for potential-free contacts

• Selectable function of the binary inputs: acting as secondary inputs directly on the switching outputs

or acting as independant binary inputs with bus communication

• Free allocation of the functions switching, dimming, solar protection control, send value and scene

control to the inputs

• Two independent switching objects per input

• Blocking object for each input

• Separately selectable behaviour per input at bus voltage recovery

• Telegram rate limitation for both inputs

• About 20 cm long wires for connecting phase conductor, outputs, inputs and bus

• Bus-powered electronics

• Integrated bus coupling unit

• Enclosed bus terminal for bus connection

• For installation in a ush-mounting wall or ceiling box with 60 mm diameter

Dimension (Ø x H) 53 x 28 mm

7-Anti-glare_solar protection actuators.indd 15 26.07.2018 14:23:26