User Manual

6-12
Solar protection, anti-glare protection, utilization of daylight
Anti-glare/solar protection actuators
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
6
Range overview UP 520/..3
Product Title Dimensions
(W x H x D)
[mm]
Stock No. Product No. DT
Shutter Blind Actuator, 1 x AC 230 V, 6 A, with mounting frame
and BTI interface
71 x 71 x 42 5WG1520-2AB03 UP 520/03 A
Shutter Blind Actuator UP, 1 x AC 230 V, 6 A 50 x 50,9 x 41,3 5WG1520-2AB13 UP 520/13 A
RS 520/23, RL 521/23: The AP 641 room control box and AP 118 automation module box must be ordered separately. See Chapter Quick-
Assembly System, Room Control Box.
Shutter Blind Actuator, 1 x AC 230 V, 6 A
Electrically interlocked relays (drive protection)
End position detection
Screwless terminals for connection and through-wiring of untreated single-core, stranded or multi-
core conductors, 0.5...2.5mm²
Bus-powered electronics
Integrated bus coupling units, bus connection via bus terminal
For insertion in ush-mounting switch and socket boxes 60 mm in diameter and 60 mm deep
Congurable behavior in the event of a bus voltage failure and recovery
Automatic mode for sunlight tracking control
Manual or standard mode
Status: transmitting status per channel, status position of sun protection 8-bit, status position of slats
8-bit
Integrated 1-/8-bit scene control
8 scenes to be integrated per channel
Travel lock (e. g. for cleaning the outer shutter/blinds)
Separate raising/lowering protection
Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active
Individual or shared conguration of actuator channels
Adaptation of objects and functions to drive type
Suitable for integration in a sunlight tracking control system
Using position data (8-bit value) travel to end position, stopping, stepwise adjustment sun protection
control (up/down) and Slat control (open/closed)
UP 520/..3
7-Anti-glare_solar protection actuators.indd 12 26.07.2018 14:23:25