User Manual

6-10
Solar protection, anti-glare protection, utilization of daylight
Anti-glare/solar protection actuators
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
6
Stock No. Product No. DT
5WG1523-1AB11 N 523/11 A
N 523/11 Venetian blind actuator, 8x AC 230 V, 6A, with sunlight tracking of slats
• 8 channels
• For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a
motor for AC 230 V and electromechanical limit switches
• Rated contact voltage AC 230 V, 50 Hz
• Congurable behavior in the event of a bus voltage failure
• Congurable behavior in the event of a system voltage recovery
• Automatic mode for sunlight tracking control
• Manual mode
• Indication of direct operation with status object
• Status position of slats, 8-bit
• Integrated 1-/8-bit-scene control, 8 Scenes to be integrated per channel
• Suitable for integration in a sunlight tracking control system
• Sun protection control (up/down) using position data (8-bit value)
• Integrated power supply unit for the electronics, connected to AC 230 V
• Slat control (open/close) using position data (8-bit value) or travel to end position, stopping, stepwise
adjustment
Stock No. Product No. DT
5WG1524-1AB01 N 524/01 A
N 524/01 Shutter / blind actuator, 4 x DC 6 ... 24 V, 1 A
• LED for status indication per output
• Direct operation (local operation)
• 4 channels
• For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a
motor for DC 24 V and electromechanical limit switches
• Electrically interlocked relays (for reversing direction of rotation)
• Congurable behavior in the event of a system voltage recovery
• Congurable behavior in the event of a bus voltage failure
• Automatic mode for sunlight tracking control
• Manual or standard mode
• Transmitting status
- Per channel
- Position of sun protection, 8-bit
- Status position of slats, 8-bit
• Integrated 1-bit/8-bit scene control, 8 scenes to be integrated per channel
• Alarm: Move to safety position, locking in this position for as long as alarm is active
• Adaptation of objects and functions to drive type
• Suitable for integration in a sunlight tracking control system
• Sun protection control (up/down)
- Using position data (8-bit value)
- Travel to end position, stopping, stepwise adjustment
• Slat control (open/close)
- Using position data (8-bit value)
- Travel to end position, stopping, stepwise adjustment
• Electronics powered via an integrated power supply unit. Supply voltage AC 230 V
• Integrated bus coupling units, Bus connection via bus terminal
Rated voltage DC 24 V
Rated current 6
Number of channels 4
Sun position tracking Yes
Wind alarm Yes
Dimension width (1 MW = 18 mm) 6 MW
7-Anti-glare_solar protection actuators.indd 10 26.07.2018 14:23:25