User Manual

6-2
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Solar protection, anti-glare protection, utilization of daylight
Overview and selection guides
General
Sunlight tracking control
With sunlight tracking control, the position of the sun is tracked so that the blind slats are not completely closed, but rather automatically ad-
justed to prevent the sun from shining directly into the room. The spacing between the blind slats still allows diffuse daylight to enter the room
and contribute to ensuring glare-free room lighting while lowering electricity costs.
Total reflection
of direct sunshine Portion from diffuse daylight






MM
Drives
Shutter/blind
switches for manually
operation
Combi/sunblind
actuator
Power Supply
Weather Station
230 V AC
24 V DC
KNX
I202_01359
Benefits
• Reduced energy consumption and costs for room lighting
• Optimum room climate
• Glare-free workplaces
You will need
• Weather station AP 257
• Electronic power supply unit
• Sunblind actuator N 523/11
• Pushbutton, double UP 222/3
• Drives
• Bus
66
14_VS_2017_Gamma HQ_EN_Chapter_6_V1.indd 2 26.07.2018 14:23:55