User Manual

5-11
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Lighting
Technical specications
Switching/dimming actuators
Continuation of the table ...
DALI control outputs Control outputs 1...10 V
Type N 141/21 N 141/03 N 141/31 N 525E01 N 526E02 N 526/02
Application program
1)
9834xx
1)
9837xx
1)
9833xx
1)
983Dxx 980801 981301 905303
Name Twin plus plus Twin
Twin
Functions
Max. number of group addresses 3000 3000 3000 3000 108 250 35
Max. number of assignments 3000 3000 3000 3000 107 250 47
Integrated constant light level control 16 16 3
Configurable behavior in the event of a bus voltage failure n n n n n n n
Configurable behavior in the event of a bus voltage recovery n n n n n n n
Configurable behavior in the event of a system voltage failure n n n n n
Configurable behavior in the event of a system voltage recovery n n n n n n
Control functions
Broadcast n n n n n
Groups 32 16 32 32
Individual ECG 128 64 128
Switching
Switching ON/OFF n n n n n n n
Configurable starting value n n n n n n n
Switching ON/OFF possible via BRIGHTER/DARKER dimming n n n n n n n
Dimming
BRIGHTER/DARKER dimming n n n n n n n
Adjustable dimming time n n n n n n n
Brightness limitation, adjustable min. dimming value/max. dimming
value
n n n n n n n
Value transmission
Set 8-bit value n n n n n n n
Scene control
Integrated 8-bit scene control n n n n n n n
Scenes to be integrated per DALI output 16 16 16 16 16
Scenes to be integrated per channel 8
Effect control
Integrated effect control (one-off or cyclic chaselight operation,
color control)
4 4
Emergency lighting
Support for prescribed test sequences for emergency lights n n n
Controlling single battery lights n n n
Saves test results of emergency lighting n n
Status
DALI short circuit n n n n n
2)
DALI power supply n n n n n
Status output (ON/OFF, value, lamp fault, ECG fault) n n
3)
n
3)
Status group (ON/OFF, value, lamp fault, ECG fault) n n n n
Status ECG (ON/OFF, value, lamp fault, ECG fault) n n n
Time functions
ON/OFF delay n n n n n n n
Timer mode, 1-step (stairwell circuits) n n n n n n
Timer mode, 2-step n n n n n n
Night mode (lighting for cleaning) n n n n n n n
Warning of impending OFF n n n n n n
Further functions
DALI sensors
4)
/2-point-control n n n n
Stand-by shut down (areas) 12 6 12
Function burn-in n n n
Renew defective ECG without software n n n n n n n
Stand-alone mode n n n n
Pre-loaded applications n n
1)
For current application programs, see www.siemens.com/gamma-td
2)
Per channel
3)
Status ON/OFF, value
4)
Only selected DALI sensors are supported, see APB www.siemens.com/gamma-td
55
12_VS_2017_Gamma HQ_EN_Chapter_5_V1.indd 11 26.07.2018 14:13:10