User Manual

5-6
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Lighting
Overview
DALI control output
Wiring of lighting groups 1...10 V control with KNX
1 ... 10V
KNX
1 ... 10V
KNX
1 ... 10V
KNX
1 ... 10V
KNX
1 ... 10V
KNX
1 ... 10V
KNX
1 ... 10V
KNX
1 ... 10V
KNX
230 V AC
I201_14025a
L1L2L3KNX
1 ... 10 V
Wiring of lighting groups with DALI with KNX
KNX
DALI
230 V AC
I201_14026a
L1L2L3KNX
DALI
Modern lighting systems can be controlled efficiently and conveniently
with DALI. Their efficiency can be increased even more when combined
with the advantages of KNX. That’s why KNX/DALI gateways from
Siemens offer both standards directly: for DALI digital lighting
(IEC 62386) and for KNX building control (ISO/IEC 14543-3 or
DIN EN 50090). It’s possible to integrate DALI lighting into KNX
installations quickly and easily.
Benefits:
• Lighting groups are not hardwire-connected
• Possible to plan control lines and power supply separately
• Even, uniform load distribution throughout the power supply network
• Lower fire load thanks to fewer cables
• Planning is simpler and faster
• Integration of emergency lighting into the general lighting
• Support for selected sensors with DALI interface
• Switching off standby when lighting is turned off
• Replacement of defective single-channel ballasts without software
55
12_VS_2017_Gamma HQ_EN_Chapter_5_V1.indd 6 26.07.2018 14:13:08