User Manual

5-3
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Lighting
Technical specications
Dimmers
Dimmers
Type N 528D01 N 528C01 N 554D31 UP 525/03 UP 525/13 UP 525/31 RS 525/23
Enclosure data
Design N N UP UP UP RS
Modular installation devices for mounting on
TH35 EN 60715 mounting rail
n n
For installation in flush-mounting switch and socket boxes
with Ø = 60 mm
n n n
10-pole BTI socket (BTI - Bus Transceiver Interface) for
plugging of bus terminal devices with BTI connector
n
Modular installation device for mounting in AP 118 auto-
mation module box or AP 641 room control box
1)
n
Interface for connection of a universal dimmer expansion
Dimensions
• Width/Ø [mm] (1 MW = 18 mm) 4 MW 8MW 71 50 Ø 53 50
• Height [mm] 71 41.3 28 35
• Depth [mm] 41.5 50.9
Mounting type
Screw fixing n
Power supply
Bus-powered electronics n n n n n n
Electronics powered via an integrated power supply unit,
for supply voltage 230 V AC
Power loss
max. power loss [W] 6 7 2 2 2 2
Bus connection
Integrated bus coupling units n n n n n n
Bus connection via bus terminal n n n n n n
Outputs
Load output
Number of channels 2 4 1 1 1 1
Load type
R, L, C
~
~
~
R, L, C
~
~
~
LED
R, L, C
~
~
~
R, L, C
~
~
~
R, L, C
~
~
~
R, L, C
~
~
~
Load
Contact rated voltage, AC [V]
230
or
120
230 230 230 230 230
Dimmer output [VA]
0... 300
2)
or
0...150
0... 300
2)
10... 250 10... 250 50... 210 10... 250
Protection
Electronic protection of outputs against overload and short
circuit
n n n n n n
Inputs
Max. cable length, unshielded, twisted [m] 5
For signal inputs (floating contact) 2
Determination of switching state by means of the voltage
generated in the device
n
For conventional pushbuttons 230 V AC
1)
The AP 641 room control box and AP 118 automation module box must be ordered separately,
see Chapter Quick-assembly system - Room control box - Module boxes
5)
Max. 500 VA or 250 VA one channel only used
55
12_VS_2017_Gamma HQ_EN_Chapter_5_V1.indd 3 26.07.2018 14:13:07