User Manual
4-7
Combination devices
Input/Output devices
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
4
Range overview UP 5..
Product Title Stock No. Product No. DT
Switching actuator, 1 x AC 230 V, 16 A; 2 x binary input 5WG1511-2AB10 UP 511/10 A
Switch actuator, 2 x AC 230 V, 6 A; 2 x binary input 5WG1562-2AB31 UP 562/31 A
Switch actuator
• Rated contact voltage AC 230 V
• 2 binary inputs for potential-free contacts
• 20 cm long wires for connecting phase conductor, output, inputs and bus
• Output to be congured as NO or NC contact
• Selectable preferred output state at bus voltage failure and recovery
• Switching status object
• Selectable additional functions:
- On/off delay
- Time-switch
- Logic operation, function forced positioning
• Selectable function of the binary inputs:
- Acting as secondary inputs directly on the switching outputs or acting as independant binary inputs
with bus communication
- Free allocation of the functions switching, dimming, solar protection control, send value and scene
control to the inputs
- Two independent switching objects per input
- Blocking object for each input
- Separately selectable behaviour per input at bus voltage recovery
- Telegram rate limitation for both inputs
• Integrated bus coupling units, bus-powered electronics
• Enclosed bus terminal for bus connection
• Installation in a ush-mounting wall or ceiling box with Ø 60 mm
Dimension (Ø x H) 53 x 28 mm
UP 5..
3-Input_Output devices.indd 7 26.07.2018 14:09:40