User Manual

3-6
Input devices
Binary input devices
Binary inputs/Modular installation system
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
3
Stock No. Product No. DT
5WG1260-4AB23 RL 260/23 A
RL 260/23 Binary Input, 4 x AC/DC 12...230 V
• 4 Inputs for AC/DC 12...230 V
• Max. cable length, unshielded, twisted 100 m
• Bus-powered electronics
• Integrated bus coupling unit, with bus connection via bus terminal block
• Type of protection: IP 20
• Screw-less terminals for connection and through-wiring of untreated single-core, stranded or
multi-
core conductors, 0.5...2.5 mm
2
• For mounting in AP 118 automation module box or AP 641 room control box
• The following functions can be selected per input:
- Switching state/send binary value/Transmission of the input objects after change
- Switch edge, short/long switch, 8-bit value edge, 8-bit value short/long
- Dimming, shading control, single button group control
- 1/8-bit scene control
- 16-bit oating-point value edge and 16-bit oating-point short/long
- Pulse counting with/without limit value monitoring (8/16/32 Bit)
• The following functions can be selected per input pair:
- 2-pushbutton dimming with stop telegram and 2-pushbutton shading control
• Optional blocking of each input by means of the respective blocking object
• Optional cyclic transmission of input objects
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See Chapter Modular Installation System - Room control box - Module boxes.
Dimensions (W x H x D) 86,5 x 47,8 x 36,2 mm
Stock No. Product No. DT
5WG1260-4CB23 JB 260C23 A
JB 260C23 Binary Input 4 x AC/DC 12...230 V
• 4 Inputs for AC/DC 12...230 V
• Max. cable length, unshielded, twisted 100 m
• Bus-powered electronics
• Integrated bus coupling unit, with bus connection via bus terminal block
• Type of protection: IP 20
• As built-in device with 1/2 inch thread connection for mounting to or in a UL/NEMA Junction Box with
feedthrough of the function wires through the 1/2 inch threaded connector
Dimensions (W x H x D) 70 x 90 x 44,6 mm
5-Binary inputs_DIN rail mounted devices.indd 6 26.07.2018 13:52:15