User Manual

3-2
Siemens Switzerland Ltd www.siemens.com/gamma 2019
Building Technologies Division
Input devices
Technical specication
Binary input devices
Binary input devices
Type N 262E01 N 262E11 N 263E01 N 263E11 N 264E11 RL 260/23 JB 260C23 UP 220/21 UP 220D31 N 501 N 502/02 UP 511/10 UP 562/31 UP 520/31 UP 525/31
Enclosure data
Design N N N N N RL JB UP UP N N UP UP UP UP
Modular installation devices for
mounting on TH35 EN 60715
mounting rail
n n n n n n n
For inserting into flush-mounting switch
and socket boxes with Ø = 60 mm
n n n n n n
Modular installation device for moun-
ting in AP 118 automation module box
or AP 641 room control box
2)
n
Modular installation device for
mounting in Junction Box 4“ x 4“
n
Dimensions
• Width [mm] (1 MW = 18 mm) 6 MW 6 MW 6 MW 6 MW 6 MW 47.8 70 42 42 8 MW 8 MW Ø 53 Ø 53 Ø 53 Ø 53
• Height [mm] 86.5 90 42 42
• Depth [mm] 36.2 44.6 8.5 8.5 28 28 28 28
Display/control elements
LED for status indication per input n n n n n n n
Power supply
Bus-powered electronics n n n n n n n n
Electronics powered via an integrated
power supply unit for supply voltage
230 V AC
n n n n n n n
Bus connection
Integrated bus coupling units n n n n n n n n n n n n n n n
Bus connection via contact system to
data rail
n n n n n n n
Bus connection via bus terminal n n n n n n n n n n n n n n n
Inputs
Max. cable length, unshielded,
twisted [m]
100 100 100 100 100 100 100 10 10 100 100 5 5 5 5
Pushbutton inputs
For signal input (floating contacts) 8 16 8 2
3)
4
3)
2 2 2 2
Determination of switching state by
means of the voltage generated in the
device
n n n n n n n n n
For voltage input n n n n n n n
• 230 V AC
• 24 V AC/DC
• 12...230 V AC/DC 8
6)
8
6)
4 4 8 8
• 12...230 V AC/12...115 V DC 16
6)
1)
Also available as c-UL version, Order No.: 5WG1261-1CB01
2)
The AP 641 room control box and AP 118 automation module box must be ordered separately, see Chapter Quick-assembly system - Room control box-
Module boxes
3)
Inputs, alternatively can be used as outputs for controlling LEDs up to a maximum of 2 mA
4)
Pushbutton inputs with shared ground (N)
5)
Pushbutton inputs with shared ground (COM-)
6)
The pushbutton inputs are mutually insulated from the base
3
3
08_VS_2017_Gamma HQ_EN_Chapter_3_V1.indd 2 26.07.2018 13:51:57