User Manual

2-21

Output devices

Binary output devices

Modular switching actuators / DIN rail mounted devices

Siemens Switzerland Ltd

Building Technologies Division

2019www.siemens.com/gamma

Range overview N 562/21, N 512/21, N 513/21

Product Title Stock No. Product No. DT

Switch actuator submodule, 3 x AC 230/400 V, 10 AX, C load, Load-check 5WG1562-1AB21 N 562/21 A

Switch actuator submodule, 3 x AC 230/400 V, 16AX, C load, load-check 5WG1512-1AB21 N 512/21 A

Switch actuator submodule, 3 x AC 230/400 V, 20 AX, C load, load-check 5WG1513-1AB21 N 513/21 A

Switch actuator, submodule

• 3 Floating relay contacts

• Rated contact voltage, 230 V AC

• Interface for connecting a switching actuator submodule and software for controlling up to 4 swit-

ching actuator submodules

• Selectable 3-phase switching function (simultaneous switching of 3 outputs)

• Direct operation (local operation via main module)

• LED for indicating direct operation for each output via main module

• Selectable 1- to 3-stage fan speed control function

• Function for controlling thermo-electrical drives

• Integrated 8-bit scene control

• Time functions: off delay, on delay, Timer mode (automatic stairwell switch), Night mode (lighting for

cleaning), Warning of impending off

• Logical functions: Positively driven operation, Logic function (2 objects), Can be inverted per output

(NO contact/NC contact)

• Per channel: transmitting status, Operating hours counter with limit monitoring, Switching cycle coun-

ter with limit monitoring, Load current recording, Load current monitoring

• Power supply for its own electronics and for the electronics of the connected switching actuator sub-

modules via the bus voltage

• Bus connection via bus terminal

Dimension width (1 MW = 18 mm) 3 MW

N 5../21

13-Switching actuators _ DIN rail mounted devices.indd 21 23.07.2018 14:09:02