User Manual

2-13
Output devices
Binary output devices
Switching actuators / DIN rail mounted devices
Siemens Switzerland Ltd
Building Technologies Division
2019www.siemens.com/gamma
2
Switching actuator
• One relay contact per output as switching element
• Rated contact operating voltage AC 230 V
• Rated contact frequency: 50/60 Hz
• Per output with mechanical display of the switching status via slide switches, which can also be used
for direct manual operation of the switching output
• Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or
multi-core conductors, 0.5 ... 2.5mm²
• One phase terminal per output
• Bus-powered electronics
• Integrated bus coupling unit, bus connection via bus terminal block
• Red LED for display of the activation of the addressing mode as well as the operational readiness
• Housing: plastic, color RAL 7035 (light grey), N-system
• DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
• Type of protection: IP 20
Per output
• selectable operating mode (normal mode, time switch mode, ashing mode)
• selectable relay mode (NC/NO)
• variable On and Off delay times
• two selectable logic operations (AND, OR, NAND, NOR, XOR, FILTER, TRIGGER)
• selectable sending of status objects on request, cyclically and/or automatically after a change
• selectable switching state on bus voltage failure
• selectable start value of the switching object on bus voltage recovery
• optional addition of a night mode object for time-limited switching On of the output, i.e. the
illumination, at night
• variable On period at night or time switch mode
• selectable addition of an object to change the On period at night or time switch mode
• selectable post-triggering (1x, 2x, 3x, 4x, 5x) of the On period in time switch mode
• selectable warning signal prior to imminent switching-off by brief off and on switching (ashing) at
night or in time switch mode and/or via an optional warning object
Per output selectable functions:
• For manual override ON
• For permanent OFF switching
• Blocking of the output
• For switching on or off in forced mode
• Counting of operating hours and threshold monitoring
• Counting of load cycles and threshold monitoring
• Integrated 8-bit scene control with up to 8 scenes per output
• Construction site function switching
• Object for monitoring of device function
• Object for targeted retrieval of status values
N 53x/..
13-Switching actuators _ DIN rail mounted devices.indd 13 23.07.2018 14:08:59