User Manual

GAMMA instabus
Release: 12/2015
Application Program Bus Interface Modules M130, M131, M132 and M135
Runtime Environment for KNX-Processors 184/11 and 184/21
Technical Manual pages 17 Siemens AG
Building Technologies
Control Products and Systems
page 4 © Siemens AG 2015 P. O. Box 10 09 53,
Subject to change without further notice. D-93009 Regensburg
1.3 BIM M 132 and Chipset 184/21
Address
in F0537
Bus
access
address
Used by
Type
0xFEDF
0xFBD0
n.a.
System
RAM
0xFBCF
0xFB00
n.a.
User
(Stack and Variables)
RAM
0xF7FF
0xF400
n.a.
System
RAM
0xF3FF
0xE000
n.a.
User
(Variables)
RAM
0xBFFF
0x8000
(Bank 5)
n.a.
System
(Reserved)
Flash
0xBFFF
0x8000
(Bank 4)
n.a.
User
(Appl.-Code)
Flash
0xBFFF
0x8000
(Bank 3)
n.a.
User
(Appl.-Code)
Flash
0xBFFF
0x8000
(Bank 2)
0xBFFF
0x8000
User
(Appl.-Code)
Flash
0xBFFF
0x8000
(Bank 1)
0x7FFF
0x4000
User
(Appl.-Code)
Flash
0xBFFF
0x8116
(Bank 0)
0x3FFF
0x0116
User
(Appl.-Code)
Flash
0x8115
0x8000
(Bank 0)
0xE915
0xE800
User
(Appl.-InfoBlock)
Flash
0x7FFF
0x7800
0xE7FF
0xE000
User
(RootCode)
Flash
0x77FF
0x7700
n.a.
System
(JumpTable)
Flash
0x76FF
0x0000
n.a.
System
Flash