User Manual

GAMMA instabus
Release: 12/2015
Application Program Bus Interface Modules M130, M131, M132 and M135
Runtime Environment for KNX-Processors 184/11 and 184/21
Siemens AG pages 17 Technical Manual
Building Technologies
Control Products and Systems
P. O. Box 10 09 53, © Siemens AG 2015 page 3
D-93009 Regensburg Subject to change without further notice.
1.2 BIM M 131 and Chipset 184/11
Address
in F0535
Bus
access
address
Used by
Type
0xFEDF
0xFBD0
n.a.
System
RAM
0xFBCF
0xFB00
n.a.
User
(Stack and Variables)
RAM
0xF7FF
0xF400
n.a.
System
RAM
0xF3FF
0xF000
n.a.
User
(Variables)
RAM
0xEFFF
0xD000
n.a.
System
(Reserved)
Flash
0xCFFF
0xC000
n.a.
User
(Appl.-Code)
Flash
0xBFFF
0x8116
0x3FFF
0x0116
User
(Appl.-Code)
Flash
0x8115
0x8000
0xE915
0xE800
User
(Appl.-InfoBlock)
Flash
0x7FFF
0x7800
0xE7FF
0xE000
User
(RootCode)
Flash
0x77FF
0x7700
n.a.
System
(JumpTable)
Flash
0x76FF
0x0000
n.a.
System
Flash