User Manual

32
Siemens Building Technologies
Cerberus Division
e1143b
06.2000
7 Configuration notes
The FHI Pad deals with a subset of blocks configured on the FSS system.
NISE_CNF is the software tool used to configure FHI Pad board EPROMs.
The configurator is used to generate the following tables to be stored on EPROM or
downloaded to the Pad:
- Digital Technological Point Table (used by LMS)
- Security Point Table (used by FSS)
- Control FHI Pad existence information (used by FSS)
- Other minor tables
All the security blocks in the FSS should belong to a continuous range within the FSS,
in order to simplify the configuration procedure. In this case you can use the configura-
tor's range option, that greatly speeds up the configuration process.