User Manual

16
Siemens Building Technologies
Cerberus Division
e1143b
06.2000
CK11
810
Cerban or Cerloop
C-Bus
CC11 111
CC11 112
CC11 113
CC11 114
Fig. 8
1 2 3 4 5 6 7 8 9 10 11 12 13
Fig. 9 Message Format
Each box is a byte and all data are ASCII characters. The meaning of each byte is
1 Telegram type (sector):
"W" = Fire ; “P" = Technological ;
"Z" = Control ; "K" = Communication with GW (generated by GW)
2,3,4 Local address
5,6 Identification block 1 (group)
7,8 Identification block 2 (address)
9 Block direction:
"N" = Status without acknowledgement
"U" = Not acknowledged event
"Q" = Acknowledged event
"R" = Command
10,11 Data block A
12,13 Data block B
The following table presents the CS-11 image in terms of blocks and the specific val-
ues representing the different statuses.
Block value
It is the value that the block assumes when it is in the status listed on the corre-
sponding column.
All integer values have been chosen in order to be processed by the FSS. The FSS
template recognises all individual integer values in the range 0-8.
Status
It is the description of the state for security points representation.
All the statuses not explicitly mentioned are not treated at all.
Treatment flag
It specifies the treatment flag used in the Standard Protocol Messages.