User Manual

10
Siemens Building Technologies
Cerberus Division
e1143b
06.2000
2.4.4 Security/safety points supported by FSS
A subset of the security/safety points (from a CZ10, CZ12 or CS4) is supported by the
FSS. Other peripheral devices supported by LMS as a stand-alone system (refer to
LMS documentation for a complete list) cannot be managed by the FSS. Only a subset
of telegrams and commands exchanged between the CZ10/CZ12 control panel and the
gateway is managed by the FSS.
CZ10 POINT DESCRIPTION
Gateway_link_status
General_fault
Power_fault
Fault_xmit
Fire_alarm_xmit
Fire_alarm
Fire_organization
Fire_part_off
Fire\Tech_groups
Line_elements
Technical_digital_outputs
CC-11 (Pad V5.20) POINT DESCRIPTION
Gateway link status
Control Unit
Power supplies (1-16)
Function unit alarm/status (1-16)
Remote transmission alarms (1-8)
Remote transmission faults(1-8)
Area general alarm (1-16)
Area fire organization (1-16)
Detection zone status
Control zone status
Detection element (input)
Control element (output) without feedback
Control element (output) with feedback
Element status
CC-11 (Pad V5.21) POINT DESCRIPTION
Control unit
Remote terminal
Line interface (1-16)
Remote transmission device (1-8)
CI11 fire unit
CI11 control unit
Fire area (1-16)
Fire section (1-99)
Digital zone
Element status
CC-11 (Pad V5.25) POINT DESCRIPTION
Extinguish section
Multi logic zone (exting)
Programmable control zone
Interhorn element
Externhorn element
Remote transmission “other” element
Alarmhorn element
Alarmhorn element
Extinguish subsystem
Lon interface 1
Lon interface 2
Remote control unit