User Manual

Extras
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 02/2016, A5E37143404B AA
47
From card
This function reads parameter data from the memory card in the Control Unit to the Inverter's
memory.
During the upload process, the user is given the option to selected a unique number
between 0 and 99, which then loads the parameter set stored under that number on the
memory card to the Inverter's memory. Should the user select a parameter set that does not
actually exist on the memory card, the BOP-2 displays a cloning error.
The
symbol denotes where the screen automatically displays a new screen on the
completion of a process.
Image 11-6 Extras - reading data from the memory card