Operating Instructions

ManualsBrandsSiemens ManualsVariable Speed DriveEU-Declaration of Conformity, SINAMICS G120

451

452

453

454

455

456

457

458

459

460

List of parameters

Parameters

1-451

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Display parameter for binary quantity QL of instance NCM 1 of the numeric comparator.

QL is only set if X0 < X1.

Description: Setting parameter for the run-time group in which the instance NCM 1 of the numeric comparator is to be called.

Value: 5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance NCM 1 within the run-time group set in p20322.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source for set input S and reset input R of instance RSR 2 of the RS flipflop.

Index: [0] = Set S

[1] = Reset R

Description: Display parameter for output Q of instance RSR 2 of the RS flipflop

r20321 BO: NCM 1 output QL / NCM 1 output QL

Access level: 3 Calculated: - Data type: Unsigned32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 7225

Min Max Factory setting

- - -

p20322 NCM 1 run-time group / NCM 1 RTG

Access level: 3 Calculated: - Data type: Integer16

Can be changed: T Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 7225

Min Max Factory setting

5 9999 9999

p20323 NCM 1 run sequence / NCM 1 RunSeq

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: T Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 7225

Min Max Factory setting

0 32000 830

p20324[0...1] BI: RSR 2 inputs / RSR 2 inputs

Access level: 3 Calculated: - Data type: U32 / Binary

Can be changed: T Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 7240

Min Max Factory setting

- - 0

r20325 BO: RSR 2 output Q / RSR 2 output Q

Access level: 3 Calculated: - Data type: Unsigned32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 7240

Min Max Factory setting

- - -