Operating Instructions

Changes in the current edition
Essential changes with respect to Edition 09/2017
New hardware
● PM240-2 Power Module, FSG
Power module for the SINAMICS G120 (Page 39)
Dimensioned drawings, drilling dimensions for the PM240-2 Power Module, IP20
(Page 76)
Specific technical data, 400 V inverters (Page 494)
Specific technical data, 690 V inverters (Page 504)
New functions
Firmware version 4.7 SP10 (Page 517)
Corrections
● Article number of the PM240-2 PT Power Module, 132 kW, corrected.
Technical data, PM240-2 Power Module (Page 482)
● Dimensions of the PM240-2 Power Module corrected.
Dimensioned drawings, drilling dimensions for the PM240-2 Power Module, IP20
(Page 76)
● Setting the feedback signal for the line contactor control corrected.
Line contactor control (Page 373)
● Technical data of analog input AI 2 has been amended.
Technical data for CU230P-2 (Page 441)
Revised descriptions
● Only commissioning using the Startdrive PC-based tool is described. Commissioning with
STARTER has been removed.
Exceptions: Write and know-how protection.
You can find information on commissioning with STARTER on the Internet:
Operating Instructions, 09/2017 Edition (https://support.industry.siemens.com/cs/ww/
en/view/109751316)
Converter with the CU230P-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF 3