Operating Instructions

Commissioning

Carrying out basic commissioning

69 |

118

Siemens

A5E36496664A_f

Smart Infrastructure 2021-10-11

8. Select the method which the converter uses to measure the data of the

connected motor.

Depending on the selected application class and technological application, the

available methods for motor identification may vary:

- Inhibited: P1900 = 0

- Motor data identification and speed controller optimization: P1900 = 1

- Motor identification at standstill: P1900 = 2

If you choose to identify the motor data, go to the JOG page after you have

finished classic quick setup. For information about motor identification, see

operating instructions „SINAMICS G120 Smart Access” A5E43332487,

SIOS Entry-ID: 109792113, Chapter „JOG”.

9. Complete quick setup. You can select to go to the JOG page immediately or

later.