Operating Instructions

7.1.3 Transferring the setting from the memory card
Automatically transferring
Precondition
The inverter power supply has been switched off.
Procedure


1. Insert the memory card into the inverter.
2. Then switch on the inverter power supply.
If there is valid parameter data on the memory card, then the inverter accepts the data from
the memory card.
❒
Manually transferring
Preconditions
● The inverter power supply has been switched on.
● No memory card is inserted in the inverter.
Saving the settings and series commissioning
7.1 Backing up and transferring settings using a memory card
Converter with the CU230P-2 Control Units
384 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF