Installation Instructions
Table Of Contents
- Power Module PM230, IP20 / Push-through technology (PT)
- Legal information - Warning notice system
- Table of contents
- 1 Changes in this manual
- 2 Fundamental safety instructions
- 3 Introduction
- 4 Installing/mounting
- 5 Connecting
- 6 Service and maintenance
- 7 Technical specifications
- 7.1 Overload capability of the inverter
- 7.2 Cable cross-sections and tightening torques
- 7.3 Electromagnetic compatibility - overview
- 7.4 Ambient conditions
- 7.5 General technical data
- 7.6 Detailed technical data
- 7.7 Restrictions for special ambient conditions
- 7.8 Electromagnetic compatibility of variable-speed drives
- 8 Spare parts and accessories
- A Appendix
- Index
7.7 Restrictions for special ambient conditions
Current de-rating depending on the ambient operating temperature
$PELHQWRSHUDWLQJ
WHPSHUDWXUHLQr&
2XWSXWFXUUHQWLQ
/RZ2YHUORDG
+LJK2YHUORDG
The Control Unit and operator panel can restrict the maximum permissible operating ambient
temperature of the Power Module.
Current derating depending on the installation altitude
Above 1000 m above sea level you must reduce the inverter output current as a result of the
lower cooling capability of the air.
,QVWDOODWLRQDOWLWXGHLQP
2XWSXWFXUUHQW
DVD
Current and power limiting depending on the line voltage
/LQHYROWDJH>9@
&XUUHQW
3RZHU
2XWSXWYDOXHV>@
Technical specifications
7.7 Restrictions for special ambient conditions
Power Module PM230, IP20 / Push-through technology (PT)
Hardware Installation Manual, 08/2016, A5E34331322B AB 69