Installation Instructions
Table Of Contents
- Power Module PM230, IP20 / Push-through technology (PT)
- Legal information - Warning notice system
- Table of contents
- 1 Changes in this manual
- 2 Fundamental safety instructions
- 3 Introduction
- 4 Installing/mounting
- 5 Connecting
- 6 Service and maintenance
- 7 Technical specifications
- 7.1 Overload capability of the inverter
- 7.2 Cable cross-sections and tightening torques
- 7.3 Electromagnetic compatibility - overview
- 7.4 Ambient conditions
- 7.5 General technical data
- 7.6 Detailed technical data
- 7.7 Restrictions for special ambient conditions
- 7.8 Electromagnetic compatibility of variable-speed drives
- 8 Spare parts and accessories
- A Appendix
- Index
Index
8
87 Hz characteristic, 49
A
Accessories, 89
Air barrier, 29
B
Base load, 58
Base load input current, 58
Base load output current, 58
Base load power, 58
C
Cable lug, 48
ring-shaped, 48
Standard, 48
Catalog, 90
Configuring support, 90
Cooling, 29
cUL-compliant installation, 21
Current reduction, 70
D
Delta connection, 49
Dimension drawings, 81, 84, 87
Dimensioned drawings, 85
Drilling pattern, 81, 85, 87
E
Electrical installation, 39
EMC, 23
EMC installation guideline, 89
F
Field weakening, 49
G
Getting Started, 89
H
Hardware Installation Manual, 89
Harmonic currents, 75
High Overload, 58
Hotline, 91
I
Industry Mall, 90
Installing, 31
IT system, 41
L
Line and motor connection, frame sizes
FSD … FSF, 48
Line reactor
Dimension drawings, 81
Line supply type, 41
Low Overload, 58
M
Maintenance
Cleaning, 52
Dirt, 52
Pollution, 52
Terminals, 52
Ventilation, 52
N
Neutral conductor, 41
O
Operating instructions, 89
Output reactor
Dimension drawings, 84, 87
Dimensioned drawings, 85
Power Module PM230, IP20 / Push-through technology (PT)
Hardware Installation Manual, 08/2016, A5E34331322B AB 95