Operating Instructions

Product information
Components
4
29 |
118
Siemens
A5E36496664A_f
Smart Infrastructure 2021-10-11
Button Function
Reset
● Holding down the button for more than three seconds when the SINAMICS
G120 Smart Access is in power-on state resets the Wi-Fi configuration of the
SINAMICS G120 Smart Access to factory defaults.
● Holding down the button when the SINAMICS G120 Smart Access is in
power-off state and powering on the module enters basic upgrading mode
WLAN
Holding down the button for more than three seconds enables/disables the Wi-Fi
connection of the SINAMICS G120 Smart Access.
Tab. 7: SAM operator controls
LED Color Description
Converter
communication
Solid red The communication between the module and the converter is
not established.
Solid green The communication between the module and the converter is
established.
Wi-Fi
communication
Solid red The network communication is initializing.
Solid yellow
The network initialization completes but the module is not con-
nected to a PC or mobile device.
Solid green
The connection between the module and the PC or mobile de-
vice is set up and you can open the Web pages now.
Flashing green
The connection between the module and the PC or mobile de-
vice is set up and the Web page is open.
Flashing yellow
The module requires a restart because an upgrade is com-
pleted or the Wi-Fi configuration is modified.
Alternating flashing
red and yellow
The module is upgrading.
Tab. 8: SAM LED status
SAM - operator controls
SAM – LED status