Data Sheet for Product

11
Siemens
N5111
2021-12-14
Notes
Engineering
SIZER software supports users with its comprehensive physical and technical background
knowledge.
www.siemens.com/sizer
Installation
● Use without a control cabinet, i.e. wall mounting
– IP55 when a IOP-2-BT, a blanking cover or a BOP-2 is used
– Use outdoors is not permissible
● IP20 when used in the control cabinet
Commissioning
The following resources facilitate fast commissioning without requiring expert knowledge:
● STARTER software tool with graphic screen forms for standard applications
www.siemens.com/starter
● Application-specific wizards (IOP-2-BT)
● User-defined parameter list with a reduced number of self-selected parameters
● Simple local commissioning using the handheld version
● Series commissioning using the clone function with IOP-2-BT or MMC card
● Commissioning without documentation using the integrated help function (IOP-2-BT)
Operation
The Control Unit is equipped with two LEDs, i.e. RDY (Ready) and BF (Bus Fault) which
indicate the drive status by showing a red or green steady or flashing light.
Maintenance
SINAMICS G120P variable speed drives are designed to allow replacement of the Power
Module where necessary without recommissioning the drive under certain conditions. As a
result of the modular design, only the defective individual component has to be replaced in
the event of repairs.
The SINAMICS G120P is maintenance friendly. The fans must be checked and, where
relevant, replaced approximately every 40,000 operating hours.
Disposal
The device is considered electrical and electronic equipment for dispos-
al in terms of the applicable European Directive and may not be dis-
posed of as domestic garbage.
• Dispose of the device through channels provided for this pur-
pose.
• Comply with all local and currently applicable laws and regula-
tions.