Installation Instructions
Table Of Contents
- PM230 Power Module, IP55
- Legal information - Warning notice system
- Table of contents
- 1 Changes in this manual
- 2 Fundamental safety instructions
- 3 Launch
- 4 Installing/mounting
- 5 Connecting
- 6 Service and maintenance
- 7 Technical data
- 7.1 Overload capability of the inverter
- 7.2 Cable cross-sections and tightening torques
- 7.3 Electromagnetic compatibility - Overview
- 7.4 Ambient conditions
- 7.5 General technical data
- 7.6 Specific technical data
- 7.7 Restrictions for special ambient conditions
- 7.8 Current reduction depending on pulse frequency
- 7.9 Electromagnetic compatibility of variable-speed drives
- 8 Spare parts and accessories
- A Appendix
- Index
PM230 Power Module, IP55
Hardware Installation Manual, 12/2016, A5E35319202B AB
7
Changes in this manual
1
Changes with respect to the manual, edition 06/2014
The new Power Modules with frame sizes FSA, FSB and FSC support STO.
How can you identify a Power Module of the new series?
From the article number. The devices belonging to the new series have a "G" instead of an
"A" at the last but one position. Otherwise, the article numbers are identical.