Manualshelf

Operating Instructions

ManualsBrandsSiemens ManualsVariable Speed DriveEU-Declaration of Conformity, SINAMICS G120
111112113114115116117118119120
4.5 Connecting the interfaces for the inverter control
4.5.1 Plugging the Control Unit onto the Power Module
The Power Module has a holder for the Control Unit and a release mechanism.
There are different release mechanisms depending on the particular Power Module.
Inserting the Control Unit
Procedure
1. Place the two catches of the Control Unit in the matching grooves of the Power Module.
2. Press the Control Unit onto the Power Module until you hear that it latches.
The Control Unit is plugged onto the Power Module.
❒
Removing the Control Unit
Procedure
Remove the Control Unit from the Power Module by pressing the release mechanism.
Installing
4.5 Connecting the interfaces for the inverter control
Converter with the CU230P-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF 111