Operating Instructions

2 Parameters
2.1 Overview of parameters
SINAMICS G120 CU230P-2 Control Units
20 List Manual (LH9), 04/2014, A5E33838102B AA
Table 2-4 Unit group (p0505)
Unit group Unit selection for p0505 = Reference variable for %
1234
2_1 Hz % Hz % p2000
3_1 1 rpm % 1 rpm % p2000
5_1 Vrms % Vrms % p2001
5_2 V % V % p2001
5_3 V % V % p2001
6_2 Arms % Arms % p2002
6_5 A % A % p2002
7_1 Nm % lbf ft % p2003
7_2 Nm Nm lbf ft lbf ft -
14_5 kW % hp % r2004
14_10 kW kW hp hp -
21_1 °C °C °F °F -
21_2 K K °F °F -
39_1 1/s
2
%1/s
2
% p2007
Table 2-5 Unit group (p0595)
Unit group Unit selection for p0595 = Reference variable for %
Value Unit
9_1 The values that can be set and the technological units are shown in p0595.
Table 2-6 Unit group (p11026)
Unit group Unit selection for p11026 = Reference variable for %
Value Unit
9_2 The values that can be set and the technological units are shown in p11026.
Table 2-7 Unit group (p11126)
Unit group Unit selection for p11126 = Reference variable for %
Value Unit
9_3 The values that can be set and the technological units are shown in p11126.