Operating Instructions

Communication via AS-i - only for G110M
7.1 Setting the address
Fieldbuses
218 Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
Addressing via the addressing device (e.g. 3RK1904-2AB02)
Addressing via the addressing device is made offline.
Further information is contained in the AS-Interface system manual, Section "Setting the AS-i
address"
Overview of the manuals (Page 232)
Addressing via parameters
The address assignment is made with the p2012[0] and p2012[1] parameters.
If you assign the address via Startdrive, you must back up the settings so that they are not
lost if the power fails.
● Address range for Single Slave inverter, profile 7.F.E
– p2012[1]: 0 … 31, range for the A address, 0A … 31A
● Address range for Dual Slave inverter, profile 7.A.5 or 7.A.E
– p2012[0]: 0 … 31, 33 … 63 for slave 1:
– p2012[1]: 0 … 31, 33 … 63 for slave 2:
with
– 0 … 31 range for the A address, 0A … 31A
– 33 … 63 range for B address, 1B … 31B