Operating Instructions

List of parameters

Parameters

1-43

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Displays the torque-generating current actual value (Iq_act).

Dependency: Refer to: r0030

Note: This value is irrelevant for the U/f control mode.

The torque-generating current actual value is available smoothed (r0030 with 300 ms) and unsmoothed (r0078).

Description: Display and connector output for the torque setpoint at the output of the speed controller.

Description: Display and connector output for actual torque value.

Index: [0] = Unsmoothed

[1] = Smoothed with p0045

Dependency: Refer to: r0031, p0045

Note: The value is available smoothed (r0031 with 100 ms, r0080[1] with p0045) and unsmoothed (r0080[0]).

Description: Displays the instantaneous active power.

Index: [0] = Unsmoothed

[1] = Smoothed with p0045

[2] = Electric power

Dependency: Refer to: r0032

Note: The mechanical active power is available smoothed (r0032 with 100 ms, r0082[1] with p0045) and unsmoothed

(r0082[0]).

r0078 CO: Current actual value torque-generating / Iq_act

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: p2002 Dyn. index: -

Units group: 6_2 Unit selection: p0505 Func. diagram: 1710, 6310, 6714,

6799

Min Max Factory setting

- [Arms] - [Arms] - [Arms]

r0079 CO: Torque setpoint / M_set

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: p2003 Dyn. index: -

Units group: 7_1 Unit selection: p0505 Func. diagram: 1700, 1710, 6030,

6060, 6710, 8012

Min Max Factory setting

- [Nm] - [Nm] - [Nm]

r0080[0...1] CO: Torque actual value / M_act

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: p2003 Dyn. index: -

Units group: 7_1 Unit selection: p0505 Func. diagram: 6714, 6799

Min Max Factory setting

- [Nm] - [Nm] - [Nm]

r0082[0...2] CO: Active power actual value / P_act

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: r2004 Dyn. index: -

Units group: 14_5 Unit selection: p0505 Func. diagram: 6714, 6799

Min Max Factory setting

- [kW] - [kW] - [kW]