Operating Instructions

SINAMICS G120 CU230P-2 Control Units

List Manual (LH9), 04/2014, A5E33838102B AA

433

2 Parameters

2.2 List of parameters

Description: Sets the signal source for trigger input I, D input D, set input S, and reset input R of instance DFR 1 of the D flipflop.

Index: [0] = Trigger input I

[1] = D input D

[2] = Set S

[3] = Reset R

Description: Display parameter for output Q of instance DFR 1 of the D flipflop.

Description: Display parameter for the inverted output QN of instance DFR 1 of the D flipflop.

Description: Setting parameter for the run-time group in which instance DFR 1 of the D flipflop is to be called.

Value: 1: Run-time group 1

2: Run-time group 2

3: Run-time group 3

4: Run-time group 4

5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run-time group of instance DFR 1 within the run-time group set in p20206.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

p20203[0...3] BI: DFR 1 inputs / DFR 1 inputs

Access level: 3 Calculated: - Data type: U32 / Binary

Can be changed: T Scaling: - Dyn. index: -