Operating Instructions

Product information
Components
4
26 | 118
Siemens A5E36496664A_f
Smart Infrastructure 2021-10-11
Operator controls and screen symbols
Button Description
Navigation-sensor field:
● Change selection
● Change parameters
– Clockwise rotation increases the value
– Counter-clockwise rotation reduces the value
Pressing the button:
● Confirm selection
Pressing and holding down the button (> 3 s)
● Toggle between changing individual digits and changing the whole value
● In AUTO mode: no function
● In MANUAL mode: pressing starts the variable speed drive
● In AUTO mode: no function
● In MANUAL mode:
– Pressing briefly: OFF1 - the motor comes to a standstill along the set down
ramp (parameter P1121)
– Pressing and holding down the button (> 3 s) or pressing it briefly twice: the
motor coasts to a standstill
● Pressing briefly: return to the previous display
● Pressing and holding down the button (> 3 s): the IOP returns to the status screen
Pressing the button:
● Information output about the actual display
● You return to the previous display by pressing again
● Pressing the button: Toggle between external command sources and the IOP as
command source.
– MANUAL means: manual control using the IOP buttons
– AUTO means: the drive responds to external control commands (e.g.
fieldbus or terminals)
Table 3: IOP-2-BT operator controls
IOP-2-BT - operator
controls