Operating Instructions

Overview of parameters
Parameters
1-17
© Siemens AG 2008 - 2013 All Rights Reserved
SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013
Parameter values
Description
Explanation of the function of a parameter
Values
Lists the possible values of a parameter.
Recommendation
Information about recommended settings.
Index
The name and meaning of each individual index is specified for indexed parame-
ters.
The following applies to the values (Min, Max, Factory setting) for indexed adjust-
able parameters:
• Min, Max:
The adjustment range and unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is specified with the
unit to represent all indices.
When the indices have different factory settings, they are all listed individually
with the unit.
Min Minimum value of the parameter [unit]
Max Maximum value of the parameter [unit]
Factory setting Value when shipped [unit]
In the case of a binector/connector input, the signal source
of the default BICO interconnection is specified. A non-
indexed connector output is assigned the index [0].
A different value may be displayed for certain parameters
(e.g. p1800) during first commissioning.
Reason:
The setting for these parameters is determined by the oper-
ating environment of the Control Unit (e.g. by the device
type, or power unit).