Operating Instructions
Installing the Control Unit, PM230 IP55 - FSD … FSF
To insert or detach the Control Unit, you must
open the front door of the Power Module.
Close the door before you commission the inver‐
ter. Check to ensure that the seals are not dam‐
aged.
Operation with operator panel
To connect the operator panel to the Control
Unit, you have to plug in the supplied connect‐
ing cable to the Control Unit and the operator
panel.
Fasten the plug connector in the door with the
supplied clamp.
9HUELQGXQJVOHLWXQJ]XP2SHUDWRU3DQHO
)L[LHUXQJ
Installing
4.5 Connecting the interfaces for the inverter control
Converter with the CU230P-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF 113