Operating Instructions

Parameter Description
p2079 PROFIdrive PZD telegram selection extended
1:
20:
350:
352:
353:
354:
999:
Standard telegram 1, PZD-2/2
Standard telegram 20, PZD-2/6
SIEMENS telegram 350, PZD-4/4
SIEMENS telegram 352, PZD-6/6
SIEMENS telegram 353, PZD-2/2, PKW-4/4
SIEMENS telegram 354, PZD-6/6, PKW-4/4
Free telegram configuring
r2050[0…11] PROFIdrive PZD receive word
Received PZD (setpoints) in the word format
p2051[0…16] PROFIdrive PZD send word
Sent PZD (actual values) in the word format
For further information refer to the function diagrams 2468 and 2470 of the List Manual.
6.5.9 Slave-to-slave communication
Overview
"Direct data exchange" is sometimes called "slave-to-slave communication" or "data exchange
broadcast". With direct data exchange, slaves exchange data without any direct involvement
of the master.
Further information about the "Direct data exchange" function is provided in the Fieldbus
function manual.
Overview of the manuals (Page 538)
6.5.10 Acyclically reading and writing inverter parameters
Overview
The inverter supports the writing and reading of parameters via acyclic communication:
● For PROFIBUS: Up to 240 bytes per write or read request via data set 47
● For PROFINET: Write or read requests via B02E hex and B02F hex
Further information about acyclic communication is provided in the Fieldbus function manual.
Overview of the manuals (Page 538)
Application example, "Read and write to parameters"
Further information is provided on the Internet:
Application examples (https://support.industry.siemens.com/cs/ww/en/view/29157692)
Advanced commissioning
6.5 Drive control via PROFIBUS or PROFINET
Converter with the CU230P-2 Control Units
238 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF