Operating Instructions

ManualsBrandsSiemens ManualsVariable Speed DriveEU-Declaration of Conformity, SINAMICS G120

SINAMICS G120 CU230P-2 Control Units

List Manual, 04/2018, A5E33838102

2 Parameters

2.2 List of parameters

Note: CDS: Command Data Set

DDS: Drive Data Set

The following control bits are displayed in r0055:

Bit 00: r1198.0

Bit 01: r1198.1

Bit 02: r1198.2

Bit 03: r1198.3

Bit 04: r0837.0

Bit 05: r0837.1

Bit 08: r2349.0 (negated)

Bit 09: r1239.11

Bit 13: r2138.13 (negated)

Bit 15: r0836.1

Description: Display and BICO output for the status word of the closed-loop control.

09 DC braking enable Yes No -

11 Reserved - - -

12 Reserved - - -

13 External fault 1 (F07860) No Yes -

15 CDS bit 1 Yes No -

r0056.0...15 CO/BO: Status word, closed-loop control / ZSW cl-loop ctrl

PM230

PM240, PM330

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: - Scaling: - Dyn. index: -

Unit group: - Unit selection: - Func. diagram: 2526

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 Initialization completed Yes No -

01 De-magnetizing completed Yes No -

02 Pulse enable available Yes No -

04 Magnetizing completed Yes No -

05 Voltage boost when starting Active Inactive 6301

06 Acceleration voltage Active Inactive 6301

07 Frequency negative Yes No -

08 Field weakening active Yes No -

09 Voltage limit active Yes No 6714

10 Slip limit active Yes No 6310

11 Frequency limit active Yes No -

12 Current limiting controller voltage output

active

Yes No -

13 Current/torque limiting Active Inactive 6060

14 Vdc_max controller active Yes No 6220,

6320

15 Vdc_min controller active Yes No 6220,