Operating Instructions

List of parameters

Parameters

1-73

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Displays the motor rotor resistance at an ambient temperature p0625.

Dependency: Refer to: p0625

Note: The parameter is not used for synchronous motors (p0300 = 2xx).

Description: Displays the nominal rotor resistance of the motor at the rated temperature.

The value is the sum of p0625 and p0628.

Dependency: Refer to: p0628

Note: The parameter is not used for synchronous motors (p0300 = 2xx).

Description: Displays the stator leakage inductance of the motor including the motor reactor (p0233).

Description: Displays the magnetizing inductance of the motor.

Note: The parameter is not used for synchronous motors (p0300 = 2xx).

Description: Displays the rotor time constant.

Note: The parameter is not used for synchronous motors.

The value is calculated from the total of the inductances on the rotor side (p0358, p0360) divided by the rotor resis-

tance (p0354). The temperature adaptation of the rotor resistance for induction motors is not taken into account.

r0374[0...n] Motor rotor resistance cold / Mot R_r cold

Access level: 4 Calculated: - Data type: FloatingPoint32