Installation Instructions
Table Of Contents
- Power Module PM230, IP20 / Push-through technology (PT)
- Legal information - Warning notice system
- Table of contents
- 1 Changes in this manual
- 2 Fundamental safety instructions
- 3 Introduction
- 4 Installing/mounting
- 5 Connecting
- 6 Service and maintenance
- 7 Technical specifications
- 7.1 Overload capability of the inverter
- 7.2 Cable cross-sections and tightening torques
- 7.3 Electromagnetic compatibility - overview
- 7.4 Ambient conditions
- 7.5 General technical data
- 7.6 Detailed technical data
- 7.7 Restrictions for special ambient conditions
- 7.8 Electromagnetic compatibility of variable-speed drives
- 8 Spare parts and accessories
- A Appendix
- Index
Safety Integrated for novices technical overview
Application examples for SINAMICS G drives with Safety Integrated
Safety Integrated for novices (https://support.industry.siemens.com/cs/ww/en/view/
80561520)
A.1.3 Product Support
You can find additional information on the product and more in the Internet under (http://
www.siemens.com/automation/service&support)
This address provides the following:
● Actual product information (product memorandums), FAQs (frequently asked questions),
downloads.
● The Newsletter contains the latest information on the products you use.
● The Knowledge Manager (Intelligent Search) helps you find the documents you need.
● Users and specialists from around the world share their experience and knowledge in the
Forum.
● You can find your local representative for Automation & Drives via our contact database
under "Contact & Partner".
● Information about local service, repair, spare parts and much more can be found under
"Services".
Appendix
A.1 Manuals and technical support
Power Module PM230, IP20 / Push-through technology (PT)
Hardware Installation Manual, 08/2016, A5E34331322B AB 91