Operating Instructions

Special features for the PM330 Power Module
To insert or detach the Control Unit, you must open the left-hand
cover of the Power Module.
Close the cover before you commission the inverter.
Special features for the PM230 Power Module IP55, FSA … FSC
To insert or detach the Control Unit, you must
release eight or ten fixing screws of the cover
and then remove the cover.
The Power Module release mechanism is shown
in the diagram.
Attach the cover again before you commission
the inverter. Do not damage the seal of the cover
when attaching it.
1P
Installing
4.5 Connecting the interfaces for the inverter control
Converter with the CU230P-2 Control Units
112 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF