Operating Instructions

Internal control/status words
Function diagrams
2-551
© Siemens AG 2008 - 2013 All Rights Reserved SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013
Fig. 2-47 2510 – Status word 1 (r0052)
- 2510 -
Function diagram
87654321
fp_2510_97_01.vsd
Internal control/status words
G120 CU230P-2
12.12.2012 V4.6
Status word 1 (r0052)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
ZSW 1
r0052
r0052
1 = Drive ready for switching on
0 = Drive not ready for switching on
1 = Drive ready for operation (DC link loaded, pulses inhibited)
0 = Drive not ready for operation
1 = Operation enabled/pulse enable (voltage at output terminals)
0 = Pulses inhibited
1 = Drive fault present (pulses inhibited)
0 = No fault
0 = Coast down active (OFF2 active)
1 = No coast down active (OFF2 inactive)
0 = Quick stop active (OFF3 active)
1 = No quick stop active (OFF3 inactive)
1 = Switching on inhibited active
0 = No switching on inhibited (possible to switch on)
1 = Alarm present
0 = No alarm
0 = Deviation setpoint/actual speed
1 = No deviation setpoint/actual speed
1 = Control request
1 = Maximum speed reached (f_act >= p1082 (f_max))
0 = f_act < p1082 (f_max)
0 = I,M,P limit reached
1 = Limit not reached
0 = Alarm motor overtemperature
1 = Motor rotates right
0 = Motor does not rotate right
0 = Alarm drive converter overload
Signal is inverted if connected to a Digital
Output.
Bit No.
Status word 1 (r0052)
ZSW seq_ctrl
r0899
r0899
.0
ZSW fault/alarm 1
r2139
r2139
ZSW seq_ctrl
r0899
r0899
ZSW seq_ctrl
r0899
r0899
ZSW seq_ctrl
r0899
r0899
ZSW seq_ctrl
r0899
r0899
ZSW seq_ctrl
r0899
r0899
ZSW fault/alarm 1
r2139
r2139
ZSW monitor 1
r2197
r2197
ZSW seq_ctrl
r0899
r0899
ZSW monitor 1
r2197
r2197
ZSW cl-loop ctrl
r0056
r0056
ZSW fault/alarm 2
r2135
r2135
ZSW monitor 1
r2197
r2197
ZSW fault/alarm 2
r2135
r2135
.1
.2
.3
.4
.5
.6
.7
.7
.7
.6
.13
.14
.3
.15
r0052.0
r0052.1
r0052.4
r0052.5
r0052.11
r0052.2
r0052.6
r0052.9
r0052.13
r0052.14
r0052.15
r0052.3
r0052.7
r0052.8
r0052.10
[2503.7]
[2503.7]
[2503.7]
[2548.7]
[2503.7]
[2503.7]
[2503.7]
[2548.7]
[2534.7]
[2503.7]
[2534.7]
[2526.7]
[2548.7]
[2534.7]
[2548.7]
Reserved
<1>
When p1210 > 0, the source is r1214.10.
<1>