Operating Instructions

2 Parameters
2.1 Overview of parameters
SINAMICS G120 CU230P-2 Control Units
22 List Manual (LH9), 04/2014, A5E33838102B AA
The following applies to the values (Min, Max, Factory setting) for indexed adjustable
parameters:
• Min, Max:
The adjustment range and unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is specified with the unit to
represent all indices.
When the indices have different factory settings, they are all listed individually with the unit.
Bit field
For parameters with bit fields, the following information is provided about each bit:
• Bit number and signal name
• Meaning for signal states 1 and 0
• Function diagram (FP) (optional).
The signal is shown in this function diagram.
Dependency
Conditions that must be fulfilled in conjunction with this parameter. Also includes special effects
that can occur between this parameter and others.
Where necessary, "Refer to:" indicates the following information:
• List of other relevant parameters to be considered.
• List of faults and alarms to be considered.
Safety guidelines
Important information that must be observed to avoid the risk of physical injury or material
damage.
Information that must be observed to avoid any problems.
Information that the user may find useful.
Danger The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
Warning The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).
Caution The description of this safety notice can be found at the beginning of this
manual, see "Legal information" (Page 4).