Operating Instructions

Function SINAMICS
G120 G120D
*0
*&
&83
&8%
&8(
&86
&8'
&8'
(7SUR)&
14 Expansion to include a feedback signal if a memory card is not inserted in
the inverter:
● Parameter r9401 as BiCo parameter for the optional feedback signal to
the higher-level control system.
● New alarm A01101
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
15 Expansion of the "End stop control" function on the following inverters:
● SINAMICS G120
● SINAMICS G120C
● SINAMICS G120D
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ -
16 Expansion of the technology controller to include the following functions:
● Gain K
P
and integral time T
N
can be adapted.
● The system deviation can be used as adaptation signal
- - ✓ - ✓ - - - -
17 Expansion to the torque limiting for SINAMICS G120 inverters with
CU230P‑2 Control Unit
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
18 The inverter displays the state "PROFIenergy pause" as follows:
● LED RDY "green on": 0.5 s
● LED RDY off: 3 s
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Changes in the current edition (Page 3)
Appendix
A.1 New and extended functions
Converter with the CU230P-2 Control Units
520 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF