Operating Instructions

Parameters

List of Parameters

1-416

SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011

Description: Setting parameter for the run-time group in which instance MUL 1 of the multiplier is to be called.

Value: 5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance MUL 1 within the run-time group set in p20116.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source of dividend X1 and divisor X2 of instance DIV 0 of the divider.

Index: [0] = Dividend X0

[1] = Divisor X1

Description: Display parameter for quotients Y = X1/X2, integer number quotients YIN, and division remainder MOD = (Y - YIN)

x X2 of instance DIV 0 of the divider.

Index: [0] = Quotient Y

[1] = Integer number quotient YIN

[2] = Div remainder MOD

Description: Display parameter for the signal QF that the divisor X2 of instance DIV 0 of the divider is zero.

X2 = 0.0 => QF = 1

p20116 MUL 1 run-time group / MUL 1 RTG

Access level: 3 Calculated: - Data type: Integer16

Can be changed: T Scaling: - Data set: -