Instructions / Assembly

Wiring Instructions - Telco Side Cable
Insert the Telco Side Cable through the
grommet in the base of the protector.
Terminate the Telco Side cable in
between the bottom set of washers and
bottom nut of the appropriate stud (one
conductor to Tip and one to Ring) and
tighten down.
Repeat the remaining Telco cables. The
pictures show the installation for two
telephone lines. If only one line is being
protected. Only one SPD, two posts, will
be used. The other surge protector
module will not be utilized, and it can be
used as a spare
Complete two line Telco Side Cable
installation