Specifications

CAB2 Two Row Enclosure
CAB3 Three Row Enclosure
MDACT - Multi-Point Digital Alarm
Communicator Transmitter
The Model MDACT Multi-Point Digital Alarm Communica-
tor Transmitter is used in FireFinder XLS systems where
point identification of alarm, supervisory, security and
trouble events is required at Central or Remote Receiving
Stations. An intelligent RS-485 communications protocol
transmits all system information to the MDACT. The
installer selects the specific events, or groups of events,
that are to be transmitted from the MDACT over phone
lines to listed receiving station equipment. The MDACT
can transmit point information via Ademco Contact ID and
the SIA protocol. For installation, a MOM2-XMP Mounting
Plate, MOM-2 card cage, and an XMI Interface Card are
required.
CAB2 Two Row Enclosure
The Model CAB2 is the mid-sized FireFinder XLS enclo-
sure capable of housing up to two CAB-MP cabinet
mounting plates. The inner door has two rows of four
mounting slots. The outer door has space for mounting
two outer door plates (Models OD-LP, OD-BP or OD-GP).
The outer door can be configured to open from either side.
The CAB2 consists of the CAB2-BB back box, the CAB2-
BD black inner and outer door package, two CAB-MP
cabinet mounting plates, and one OD-LP lens plate. The
outer door has a single lock and key set installed. A red
version called the CAB2R is also available. Approximate
size is 45” High, 26” wide, and 8” deep.
CAB3 Three Row Enclosure
The Model CAB3 is the largest single FireFinder XLS
enclosure available. It can house up to three CAB-MP
cabinet mounting plates in the enclosure, and three rows
of inner door mounting slots. The outer door can be
configured to open from either side. The CAB3 consists of
the CAB3-BB back box, the CAB3-BD black inner and outer
door package, three CAB-MP cabinet mounting plates, and
one OD-LP lens plate. The outer door has two locks and
key sets installed. A red version called the CAB3R is also
available. Approximate size is 63" high, 26" wide, and 8"
deep.
Enclosure Trim Kits
Trim kits are available for all system enclosures for semi-
flush mounting applications. The Model CAB1-TK (for black
enclosures) and the Model CAB1R-TK (for red enclosures)
fit the CAB1 and CAB1-R enclosures. Similarly, the
CAB2-TK and CAB2R-TK fit the CAB2 enclosure, and the
CAB3-TK and CAB3R-TK fit the CAB-3 enclosure.
Remote Transponders
The FireFinder XLS system can use remote transponders
for mounting additional modules like amplifiers without
requiring a PMI or any control switches. Special doors are
available for systems using CAB2 or CAB3 remote
transponders. These doors, Models CAB2-XBD and
CAB3-XBD, omit the unused inner door and come com-
plete with ventilation louvers built into the door. The
CAB2-XBD fits on a CAB2-BB and the CAB3-XBD fits on a
CAB3-BB. The CAB2-XBD and CAB3-XBD are supplied in
black. Red versions called the CAB2-XRD and CAB3-XRD
are also available. Complete box and door kits are available
as Model CAB2-X and Model CAB3-X.
MDACT - Multi-Point Digital Alarm
Communicator Transmitter