Specifications

FS-250 Installation and Operation Manual
23
Transformer Mounting – FS-NPE
• Place the two FS-NPE transformer assemblies over the bottom two sets of studs on the
left side of the enclosure. Mounting the transformer can be accomplished before
mounting the enclosure if desired.
• Tighten provided transformer-mounting nuts.
• Plug the transformer assemblies into connectors J1 and J2 on the Main Board. Bottom
transformer plugs into J1.
• If optional additional FS-NPE transformer is being installed, install it also at this time.
FS-250
FS-NPE
Expansion
Transformer
Technical Manuals Online! - http://www.tech-man.com