Specifications

FS-250 Installation and Operation Manual

FS-RD2 OPERATING INSTRUCTIONS

Alarm Operation

In case of alarm, the System Alarm LED flashes, LCD will display alarm conditions and the buzzer

sounds. Local audible and visual signals and remote alarm signals operate.

When an alarm occurs, proceed according to the established emergency plan. Assure that all personnel

are accounted for, and notify the Fire Department to advise of the alarm and/or verify that an automatic

signal has been received at the Fire Department

Authorized Personnel Only

To silence the alarm:

To silence the notification appliances after evacuation, where permitted, operate the Button

Enable key switch and press the Alarm Silence switch. The notification appliances and buzzer

will be silenced, and LED indications will change from flashing to continuous. The Alarm Silenced

LED will be lit.

Note: Do not reset the panel until the alarm has been cleared.

Warning: Alarm silence inhibit (if set) prevents the alarm from being silenced for a

predetermined time.

To reset panel after alarm:

When the alarm condition is corrected, return the panel to normal standby operation by using the

Button Enable key switch and then pressing the System Reset switch.

Trouble Operation

Trouble is indicated by:

System Trouble LED flashes

LCD will display trouble conditions

Buzzer sounds

To silence the trouble buzzer:

Operate the Button Enable key switch and press the switch. The System Trouble LED changes

to continuous display. When the trouble condition has been cleared, you may need to reset the

panel to restore to a normal standby condition.

Warning: Leaving the panel in a trouble condition may cause a fire alarm condition not to

initiate a fire alarm sequence

Normal Standby Condition

The green Power On LED will be lit and no other indicators on.

For service, contact: ___________________________________________

Telephone Number: ___________________________________________

Frame these instructions and mount them near the annunciator for operator reference.

Technical Manuals Online! - http://www.tech-man.com