Data Sheet for Product

SQM5… Reversing Actuators Technical Instructions
Document No. 155-517P25
May 27, 2009
Siemens Industry, Inc. Page 5
Product Numbers
Table 1. Product Numbers for Pre-assembled Actuators, Continued.
Line
Voltage
4-20 mA
0-135 W
0-10
Vdc
110 V 220 V 24 V
400 50 ccw x x SQM56.664R1G3
400 50 cw x x SQM56.664R1G3R SQM56.664R2G3R
400 50 ccw x x SQM56.664R1H3
400 50 cw x x SQM56.664R1H3R
400 50 ccw x x x x SQM56.664R1Z3
400 50 cw x x x x SQM56.664R1Z3R
400 50 cw x SQM56.667R1A3R
400 50 ccw x x SQM56.667R1G3
400 50 cw x x SQM56.667R1G7R
400 50 ccw x x x x SQM56.667R1Z3
Torque
1
[lb-in]
Running
Time
2
90°@ 60
Hzsec
Rotation
Direction
Input Control Signals
3
Product Number
1. Torque will vary with the selection of the shaft. See Specifications.
2. Running time for 135°  multiply by 1.5. For 50 Hz  multiply by 1.2
3. SQM5x.xxxxxZx models also accept a 0 to 20 mA input signal.
Table 2. Product Numbers for Accessories.
Electronic Circuit Boards
AGA56.9A87 24 Vac (Z) board for SQM5x.xxxxxZx
AGA56.1A97 24-250 Vac (A) board for SQM5x.xxxxxAx
AGA56.9A17 110 Vac (Z) board for SQM5x.xxxxxZx
AGA56.9A27 220 Vac (Z) board for SQM5x.xxxxxZx
AGA56.41A87 24 Vac (G) board for SQM5x.xxxxxGx
AGA56.41A17 110 Vac (G) board for SQM5x.xxxxxGx
AGA56.41A27 220 Vac (G) board for SQM5x.xxxxxGx
AGA56.42A87 24 Vac (H) board for SQM5x.xxxxxHx
AGA56.42A17 110 Vac (H) board for SQM5x.xxxxxHx
AGA56.42A27 220 Vac (H) board for SQM5x.xxxxxHx
AGA56.43A87 24 Vac (K) board for SQM5x.xxxxxKx
AGA56.43A17 110 Vac (K) board for SQM5x.xxxxxKx
AGA56.43A27 220 Vac (K) board for SQM5x.xxxxxKx
See Figure 1. Product Number Identification Legend.
Mounting Brackets & Adapters
AGA57.4 for replacement of Honeywell M640/740/940 and
Barber Colman EA20/40/50/60 actuators. Directly
adaptable to Eclipse butterfly valves.
AGA57.3 for replacement of Honeywell MOD III, IV
actuators
ASK33.9 mounting kit for direct attachment to Siemens
VKF41... butterfly valve. (Shaft AGA58.1 required)
Shafts
AGA58.2 12 mm round with key. Gear end only.
AGA58.1 10 mm round with key. Gear end only.
AGA58.3 9 mm square. Dual-ended.
AGA58.4 3/8 inch square. Dual-ended.
AGA58.7 14 mm round with key. Gear end only.
For exact shaft sizes, see Dimensions.
Crank Arm, Push Rods
338 041 ∅ 5/16" damper push rod, 12 inches long.
338 031 Crank arm kit. Includes two crank arms for
connecting the AGA58.4 shaft to a ∅ 1/2-inch damper
shaft with two ball joints. (Does not include push rod.)
338 042 ∅ 5/16" damper push rod, 15 inches long.
338 043 ∅ 5/16" damper push rod, 18 inches long.
338 044 ∅ 5/16" damper push rod, 24 inches long.
338 045 ∅ 5/16" damper push rod, 36 inches long.
338 046 ∅ 5/16" damper push rod, 48 inches long.
Potentiometers
ASZ12.833 and ASZ12.33 1000Ω, 135°
ASZ12.803 and ASZ12.30 1000Ω, 90°
ASZ22.803 and ASZ22.30 1000/1000Ω double
potentiometer, 90°
ASZ22.833 and ASZ22.33 1000/1000Ω double
potentiometer, 135°
ASZ16.703 135Ω, 90° (wire wound)
ASZ16.733 135Ω, 135° (wire wound)
ASZ66.733 135Ω/135Ω, double potentiometer 135° (wire
wound)
Additional potentiometer models available. See Siemens
technical data sheet 7921.